RB401T-E Rebar Tying Tool up to 20mm x 20mm with 1.0 mm wire
The RB401T-E is ergonomically designed to reduce back strain. The extended frame allows you to stand-up and tie rebar for concrete slabs. The RB401T-E uses the same battery and tie wire as the RB441T and RB611T TWINTIERs.
- Road and Bridge
- Commercial Buildings
- REDUCES BACK STRAIN
The RB401T-E is an ergonomic solution for backbreaking slab work.
- TRIGGERLESS TECHNOLOGY
An automatic contact mechanism allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT
The TwinTier's Wire Bending Mechanism (Pat. Pending) produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- SLIM ARM FITS
Slim arm fits easily at a 45 degree angle for tight ties.
322mm(H) x 408mm(W) x 1100mm(L)
MINIMUM TIES PER COIL
MAXIMUM TIES PER COIL
APPLICABLE WIRE PRODUCT/GA
TW1061T / 19Ga, TW1061T-PC / 19Ga, TW1061T-EG / 19Ga, TW1061T-S / 19Ga
APPLICABLE REBAR SIZE
10 x 10 - up to 20 x 20(Unit: mm)
TIES PER CHARGE
Approx. 1/2 sec
BATTERY CHARGE TIME
65 minutes full charge ( 50 minutes 80%)